AS 3740 Wet Area GuidanceCheck the NSW Licence

Shower waterproofing Sydney

Specialist shower waterproofing in Sydney. Local contractors installing AS 3740-compliant membranes for shower recesses, walk-in showers, and wet rooms across the Sydney metro area.

What Is Shower Waterproofing?

Shower waterproofing is the specialised application of waterproof membranes to the floor, walls, and junctions of shower recesses, walk-in showers, and wet rooms. In Sydney, shower waterproofing must meet AS 3740 requirements and be performed by a licensed waterproofer registered with NSW Fair Trading. The membrane creates an impervious barrier preventing water from penetrating into the building structure, protecting your Sydney home from moisture damage and mould.

Shower Waterproofing Cost in Sydney

Typical pricing: $70 - $130 per m²

Shower Recess Only

$800 - $1,500

Standard shower base and walls up to 1800mm, including hob and corner treatments

Wet Room / Full Enclosure

$3,000 - $4,500

Full wet room conversion with floor-to-ceiling membrane and linear drain integration

Shower Waterproofing Methods We Use in Sydney

  • 1Liquid-applied polyurethane membranes for seamless coverage
  • 2Sheet membrane systems with welded seams
  • 3Cementitious tanking for shower bases
  • 4Hobless shower threshold detailing with recessed channel drains
  • 5Silicone and polyurethane sealant systems for movement joints

Quick Quote

Price range: $800 – $4,500

Per m²: $70 - $130 per m²

Compliance: AS 3740 Wet Area Standard

Licence: Check it on the NSW Fair Trading register

Get Free QuotesUse Cost Calculator

Our Shower Waterproofing Process in Sydney

Every project follows our proven process to ensure compliance with Australian Standards and NSW regulations.

1

Free inspection and measurement of your shower area at your Sydney home

2

Strip existing tiles and remove old waterproofing membrane

3

Repair substrate defects, fill cracks, and level the shower base

4

Install or repair the shower hob (curb) or prepare hobless threshold

5

Apply bond-breaker tape and pre-formed corners to all internal angles

6

Prime all surfaces and apply the first coat of waterproof membrane

7

Apply second coat of membrane perpendicular to the first

8

Allow full cure time (minimum 24 hours) before flood testing

9

Conduct flood test and issue AS 3740 compliance certificate

When You Need Shower Waterproofing in Sydney

  • You are building a new shower or renovating an existing one in your Sydney property
  • You notice water staining or damp patches on walls or ceilings near your shower
  • Grout lines in your shower are cracking, discoloured, or crumbling
  • You want to convert a bathtub space into a walk-in shower
  • Your shower base feels spongy or tiles are becoming loose underfoot

Why Use a Licensed Waterproofer in Sydney

NSW Fair Trading requires waterproofing work to be carried out by licensed professionals. Here is why that matters for your Sydney property:

Shower waterproofing is classified as specialist work under NSW regulations and requires a Waterproofing Licence

Licensed waterproofers are required to carry professional indemnity and public liability insurance in NSW

A compliance certificate from a licensed waterproofer is needed for building certification in Sydney

NSW Fair Trading can impose penalties on homeowners who engage unlicensed tradespeople for wet area work

Licensed professionals are expected to work to current AS 3740 standards, so ask for this in writing

Shower Waterproofing FAQs - Sydney

Frequently Asked Questions

Shower waterproofing in Sydney ranges from $800 for a simple shower recess to $4,500 for a full wet room conversion. The average Sydney shower waterproofing job costs around $1,500 to $2,500. Contact us for a free on-site quote tailored to your shower configuration.

If you are renovating your shower in Sydney, yes, the entire shower area must be re-waterproofed to current AS 3740 standards regardless of whether the existing shower is leaking. This is a legal requirement under the Building Code of Australia enforced by NSW Fair Trading.

Under AS 3740, shower walls in Sydney must be waterproofed to a minimum of 1800mm above the finished floor level, or 150mm above the showerhead outlet, whichever is higher. For walk-in showers without a hob, the membrane must extend to at least 1500mm from the shower rose on adjacent walls.

Absolutely. Hobless (step-free) showers are increasingly popular in Sydney homes and can be fully waterproofed using graded screed falls, linear drain systems, and extended membrane coverage. Local Sydney waterproofers specialise in hobless shower installations compliant with AS 3740.

Failed shower waterproofing can cause water to penetrate into wall cavities and floor structures, leading to timber rot, mould growth, and damage to adjoining rooms. In Sydney apartments, it can also affect neighbouring units, potentially resulting in strata claims. Early detection and re-waterproofing is far more cost-effective than structural repairs.

Water Leaking Right Now?

Act before water damage gets worse. Tell us about the leak and we'll pass it to a local Sydney waterproofing contractor who handles urgent repairs.

Get Emergency Help Now

Get a Free Shower Waterproofing Quote in Sydney

Get a free quote from a local Sydney waterproofer. No obligation, no pressure. We'll pass your enquiry on for your shower waterproofing project today.

  • 100% free, no-obligation quotes
  • Local Sydney waterproofers
  • One form, no chasing contractors
  • Tips on checking a licence before you book

Get a Free Quote

Compare local waterproofing contractors in Sydney

By submitting, you agree to be contacted by a local contractor about your quote. No spam, no obligation.

Get a Free Quote